Discussion Locked

Is it possible to add one server to two different DMZ networks?

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

2 Network Cards in one machine and 2 Internal Networks - But can only see internally if 2 x gateways are entered

Hi Experts,
Is it possible to add one server to two different DMZ networks?
I currently have a Windows 2003 machine which is currently sitting within one DMZ area of my internal network. The network adapter is configured as follows:

IP Address: 172.16.100.1 (This is mapped to an external IP of 88.45.100.1 via the Firewall)
Subnet Mask: 255.255.0.0
Default Gateway: 172.16.100.254

DNS1: 88.88.88.98
DNS2: 99.99.99.99

I can happily ping this address from within my LAN without issue, example LAN config as follows:

IP Address: 192.168.100.15
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.100.254

Now, here is where I am having trouble. I'd like to add another firewall and some new external IP's (from another ISP).
I have configured the DMZ port of the new firewall as follows:

IP Address: 182.16.100.253
Subnet Mask: 255.255.128.0
DHCP: Off

And have configured the second network card in the server as follows:

IP Address: 182.16.100.6
Subnet Mask: 255.255.128.0
Default Gateway:

DNS1: 88.88.88.98
DNS2: 99.99.99.99

I have also added this new firewall into the existing LAN - it has the following IP details:

IP Address: 192.168.100.253
Subnet Mask: 255.255.255.0

Now, when I manually reconfigure one of the machines on my LAN (take the example above) to:

IP Address: 192.168.100.15
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.100.253 (notice the change .254 to .253)

I can happily see all the machines and servers on the LAN without issue, and I can connect to the outside world with the new Public IP however when I ping the address of the second network card in the server (ie. 182.16.100.6) nothing happens, it times out.
However, if I add another gateway address to this second network card - as follows:

IP Address: 182.16.100.6
Subnet Mask: 255.255.128.0
Default Gateway: 182.16.100.253

Then I can happily ping the machine from my LAN.
The server now has two network cards and each with a gateway so it can no longer connect to the outside world. How can I fix this?

Many thanks

1 reply

by ankit7780

Yes u can
probebly for the second lan card u remove the Default gateway, and instead of default gateway u inster static route in the server toward the another network.
so by mean u two routes in your server.
0.0.0.0 0.0.0.0 pointing to your default network and another for another range of subnet pointing towards his default gateway.

This discussion is closed to new replies.