3 replies
by lord ago 1
Not sure if this would help you but I'll try!! I ran into a somewhat similar problem with a network using a DSL connection with win98se workstations using WinMX. I used WinMX (ver 2.6) because I was able to get vastly better results with it. The real problem was that I knew just about NOTHING concerning thier network. Settings, protocols, the whole bit. Anyway, I installed it and at first, it wouldn't connect. When I adjusted the settings, it connected within 5 secs. I clicked the options icon (the one with the screwdriver and hammer) and clicked connection. First I changed it so that it won't connect automatically on startup. Next, I clicked the Network/Firewall button. I used the following settings:
Outgoing Connections: Connect Directly
Incoming TCP Connections: Unable to Accept...
Host Name Resolution: Use Local OS
It warned about some limits but it worked and I was able to get the things I was after. You hawever can adjust the settings IF you do know them. Like I said, I knewZERO about the settings and the such on the network I was on and it worked quite well for me. Good luck!!
Have Fun!!!
by jjcross
by jjcross
This discussion is closed to new replies.
Trending Web Development posts
Sort by Trending