Discussion Locked

Keyboard Mouse Issue

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a XP Pro SP2 system and for some reason the PS/2 keyboard and PS/2 mouse will not work in Windows. They both work just fine in "safe mode" and keyboard functions off a dos boot disk and in bios.

In Windows the PS/2 keyboard and PS/2 mouse are having an I/O conflict but If I unplug the PS/2 mouse (use a USB mouse) the keyboard has a corrupt or missing driver (code 39) error.

I have uninstalled the keyboard and mouse in safemode and in Windows but when Windows reinstalls the driver the problem comes back. I have flashed the bios, reset the bios, removed the battery in the bios and this does not seem to solve the problem. I did run a sfc /scannow and allowed to do its thing and then run Windows update and updated all chipset drivers and this did not solve the problem.

Any suggestions?

System Specs
MSI 865PE Neo-2
P4 2.8Ghz
512MB RAM (Dual Channel)
80GB SATA
CD-RW
Nvidia FX5200
Windows XP Sp2

8 replies

by hal 9000

You have a resource sharing conflict so you'll need to go into the Control Panel, Administrative Tools, Computer Management, Device Manager and right click on Keyboard and then go to proprieties and change from the Auto settings to some that do not conflict. You'll also need to do the same thing with Mouse or Pointing Devices as well. When you have changed these settings to ones where there is no conflict you'll need to reboot the unit and allow the revised settings to take effect.

Col

by philldmc

I tried that but the auto config is selected and greyed out so I am unable to adjust those settings. I've tried in Windows and in safemode. Resource settings are greyed out, can not adjust anything..

Do you know any registry keys I could adjust?

by sgt_shultz

wow what a weird one.
it sounds to me like keyboard is just not being detected by bios at startup. i would be looking around in bios for all keyboard related settings and while in there for any reserved interrrupts or i/o resources. (do you have a modem in this? if not turn off the serial ports in the bios just for kicks. this not a laptop is it?)
...anything in the event log? so the keyboard does work? if the mouse is off--?
do you have bios set to continue past keyboard error set to display detected mouse and keyboard during post and do you *see* keyboard and mouse detected (black screen before windows loads?)
you sure no viruii? you sure no file corruption/hd problems (chkdsk f?)
you probably checked for that and i bet you've tried another ps2 keyboard or taken that one over to another pc to check it...which just leaves the mobo ps2 stuff maybe...so suggestion: use usb keyboard (rdl)
or maybe we need to stay focused on the resource conflict. what else you have installed? anything already hard coded to certain interrrupt per Hals post? does the bios have a 'most compatible' settings you can try?
if you sure files ok and keyboard works ok on another pc, one would think about bad ps2 port.

by philldmc

The keyboard works fine in the bios and in safemode it is only in windows that the keyboard does not work.

by sgt_shultz

is this a logitech internet keyboard or anything?
did you uninstall all the software that came with ur keyboard. because you forgot to mention what keyboard and mouse exactly. did you try any of the other stuff i mentioned? like a usb keyboard?
oh yeah, and
bite me

by philldmc

You are right, my appoligies, it is a standard 101/102 keyboard that I am using, and a standard PS/2 mouse using default windows drivers

by philldmc

Someone pointed out to me that I forgot to mention what type of keyboard and mouse. I am using a standard 101/102 keyboard and a standard PS/2 mouse. I am using the default Windows drivers.

by hal 9000

OK as you can not alter these settings you'll have to go in and change any device settings that are conflicting with these but first you'll need to get both the Keyboard & Mouse Resources so you'll need to posted details and then look for any hardware that is using the same resources.

You could also go into BIOS and make sure that is correctly setup and you haven't had resources dedicated to objects there that could be causing a problem when all the drivers for your system are loaded. If you set the Device Management to Auto this should cure the problem. If everything in the Device Management in BIOS is predefined that is most likely to be your problem as that has allocated resources that are being used by the Keyboard,Mouse when you have all the drivers for your hardware installed.

The reason that you can use them without problems in both DOS and Safe Mode is that you only have a minimal Drive Load installed so there are no conflicts arising.

Also I can't remember if I asked this previously have you Flashed the BIOS to the Latest available? That should help you as well.

Col

This discussion is closed to new replies.