Question Locked

LaCie for PC drive randomly stopped working

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My lacie ext. drive has been working fine for two or three months, and this morning POOF. All my music up in smoke.
Nothing out of the ordinary happened to it, it just stopped working.
Any ideas?
I'm wondering if somehow something got shaken loose. It turns on, but it doesn't show up on my computer. Tried two computers, two different USB cables.

8 replies

by mjd420nova

But the faults I've seen with LaCie was that the drivers get taken over when installing other programs. Any chance that's what happened?? Even saw one that got removed from the list completely. Turned out the user loaded WinAmp just before it disappeared.

by jdmercha

I know this doesn't help now, but I've seen LaCie products fail much more often that most.

by dr dij

two Seagate USB drives.

I've been worried that they would have problems but not the slightest. These are the silvery stackable ones.

I do HEAVY work on them saving dozens of multi-hundred meg files, changing and saving again. Never had ANY problems. They are slower to save than a SATA drive but work very reliably.

Strangely, I saw an article about the seagate external SATA drives with the same silvery form factor, and it said they only went 2x the USB drive speed, while internal SATA drives are 3x faster than this, or 6x faster than the USB drives. Not sure why. Disappointing, I was considering getting one. Some other company makes a combo external SATA/ USB which is what seagate should do.

However I have a second one I use as backup, and once, after powering it down without removing /stopping it via screeen, it did seem to get scrambled, got message that it couldn't write some file to it, probably final directory update, so this was my fault. I reformatted it and then it has been working fine ever since.

Note that I got two, one as a backup. Every few days, I'll backup folders with projects I know changed. They're cheap, and now you see why you need to.. I'd think a disk recovery place could get this, or you could stick it in a separate new USB case if just the interface, not the drive itself failed.

by girlgeek12

to look for it in the computer management module within windows. Sometimes the drive letter gets reallocated to a new piece of hardware and will wipe out the settings. If you go into disk management, if it shows up there, reassign a drive letter.

by lefelinediablo

yeah, i tried all of that. i can hear the drive running and everything, and if i hadn't tried another firewire i'd say it just wasn't connecting.

is it possible that something came loose inside the drive?

thanks

by tom_cruise_9

You might have chucked the drive by now, but I think it's the power supply. It looks like the drive is up and running- the light is on and it hums, but it's not getting enough power. If you have another drive that takes the same wattage/voltage or whatever, try subbing with that powersource. I just ordered 3 new power cables from LaCie as 3 out of 4 power sources have failed. Talk about planned obsolescence...

This discussion is closed to new replies.