Question Locked

LAN connection unplugged - but it isn't!

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've just reformatted a win XP Pro machine and am using an 3com ethernet card which has installed fine and is showing in the hardware setup.

I have a network cable connected to the card but it is reported as 'LAN connection unplugged' - but it certainly is plugged in.

During the reformat I chose not to connect to a network - I think maybe this is causing the problem.
Can anyone tell me how to get the network card connected and working???

I have recently plugged the same network cable into a different machine (running vista) and that worked fine so i pretty much know it's not a prob with the cable/socket.

Thanks

3 replies

by davedxb

Cables come in configurations.

Forgot the names...is like CROSS OVER CABLE and PARRALEL CABLE....etc.

Coloring order doesnt matter as long as you dont mix them up...thats why i use numbers. Professionaly there is a coloring order to follow. To me, makes no difference.

Between computer & computer:------

The numbers represent the inner small cables inside the CAT5/6 cable cord.

12345678 End A
36145278 End B Swap(1-3,2-6) Clock wise

Between router & computer:---------

12365478 End A Swap(4-6 clock wise)
12365478 End B Swap(4-6 clock wise)

Hence, you probably are using the wrong type of cable. Thats one possibility.

by menzo

Hey !

You can alose check you network adapter Speed.

You should check if you network adapter Link and Duplex are set to: "Auto-Detect"

Also, if you network is a 100Mbps Full Duplex you card should not be forced to 10 Half for example ...

Setting it to Auto-Detect may help you in this case

This discussion is closed to new replies.