Question Locked

(Laptop: Compaq Evo N1000C) Video is rarely visible on screen

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Plastic cover frame of the screen of my laptop was cracked. So, after ordering just that part from ebay, I changed it to a new one by myself disassembling the screen part. But after this work, **video is rarely visible on screen** even though the computer still has power on. I brought my lapton to the local laptop repair shop. They told me first that it is likely that the inverter or back-light on screen could be problem. After several days, I heard from them that the video card was a cause and motherboard needs to be changed.

My questions are
1. How is motherboard broken? I worked on just change in the plastic frame of the screen disassembling the screen part.

2. Can I change just video card not motherboard? Why do I need to change motherborad instead of just video card?

3. If the motherboard is changed, are there any other parts to be changed together with motherboard?

4. Can I save the data of my files in my computer if I have to change motherboard?

Please give me some advices on this issue.

Thank you.

4 replies

by seanferd

It could be just that different layers of the screen are not properly aligned. I can't really say for sure about that.

I don't know why the mobo is broken. Impact or voltage spike are possibilities.

The mobo probably has all electronics on board, without separate expansion cards. Look up the specs for your system, using the exact model.

Data on your system is not on the mobo. It's in the hard drive. You can always transfer data if you want to, but a mobo replacement should not alter your data.

by david.wallis

did your old screen light up?

if it did and you know for a fact the old screen lit up with awhite light, plug that into the end of the inverter and see if you get anything.

the 'backlight' is a glass tube that runs the length of the screen along the bottom which is very easy to crack if the screen has been dropped or twisted.

try tiliting the screen backwards and forwards, do you get a display??

i would check you have correctly connected the lcd harness to the inverter (if you have that kind of connection, some screens dont plug directly into the inverter)

you can get a voltmeter and tets th einverter to see if its faulty. The laptop repair shop have no way of know ig the video chip is faulty without first testing the other parts. which they havnt done or they wouldnt have told you its either the backlight or inverter, if they had tested either part they would have known ! :)

if the screen is definitely 100% ok and the inverter is 100% ok (if your testing it dont test it on the far right that goes into the screen theres a few 100 volts going through there!)

that would leave the video chip which is embedded on the board. The cheapest thing to do is ignore the laptop repair shops (they will charge you 100s to repair the fault)
and directly contact a PCB repair company theres several in the uk who charge only ?50 to repair a board,,, where as a shop would quote you 5 times that atleast!

by david.wallis

check the lcd cable for any visible breakages , it could have been damaged :)

This discussion is closed to new replies.