Question Locked

Laptop hard drive boot & reading problems

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Problem is with a Toshiba MK8026GAX 80gb hard drive from a Dell Laptop (I do not have the laptop with me). This is a friends hard drive that Dell has already replaced for her, but she has files on the harddrive that she really needs to recover if at all possible. I was told that the hard drive simply stopped booting. P.S. Hard drive sounds like it spins just fine.

FIRST THING TRIED:
I have a special cable that allows me to connect the hard drive via USB to my PC. I've done this and I can see the hard drive in windows explorer, but when I try to open up the drive it returns the message "file or directory is corrupted and unreadable".

NEXT THING TRIED:
I have a spare laptop (not a Dell), so I installed the hard drive and booted the laptop, but this time I received a message that said "Loading PBR 2...done" (a solid blue bar with Dell name was at the top of the screen). But it just hung there and wouldn't go any further.

I'm currently using the Recovery Console from my Windows XP disk and I currently see 3 partitions as follows:

-: Partition1 [FAT] 63MB (55MB free)
C: Partition2 [Unknown] 71500MB (71500MB free)
E: Partition3 [FAT32] 4754MB (634MB free)

I thought that I may be able to reinstall Windows over top of the original install and the original data files would be retained safely. But...

I can't install XP on the partition "-:" because it's too small. So I tried installing on the "C:" partition and I receive the following message: "The partition is either too full, damaged, not formatted, or formatted with an incompatible file system. To continue installing Windows, Setup must format this partition". Well, I can't format it because her data will be lost then. So I tried partition "E:" and this time it says "Windows XP cannot recognize the partition you selected."

OTHER THINGS TRIED:
I also ran FIXBOOT and FIXMBR from the Recovery Console and neither have helped. But now I received a Boot.ini error followed by a message "Windows could not start because the following file is missing or corrupt: \system32\hal.dll. Please re-install a copy of the above file". - Which I have no idea how to do and I doubt this one little issue will fix everything, but I'm game for trying.

Okay, hopefully that's enough info. Can anyone please provide help with how I can get the data off this hard drive? I only need to retrieve a couple of files.

4 replies

by kwoltman2006

UPDATE:
I found advice on another website and I ran the old faithful "Chkdsk" from the Recovery Console on my Win XP disk. It found and fixed a few problems. Still wouldn't boot, so I pulled the hard drive out and hooked it up to my special USB cable connector and I was able to copy the files over to my PC where I can now burn them to CD for my friend.

by morroccan_hot_pink

Hi I had a similar problem can you please give me some advice?

I dropped my laptop Dell inspiron. it wouldnt reboot and said system error so dell replaced the hard drive. but i hadnt backed it up.

So I bought an external casing for the hard drive to back it up but it said i have to reformat it to use it which would mean deleting all my files..... i rang dell they said there could be a corrupted file which is the reason why i cant access it... my laptop is working fine now but i need to back up my old hard drive do you know how i can back it up??

by oh smeg

Or not.

If the computer was running at the time then most likely the Heads have made contact with the Platters inside the HDD and scrapped some of the Magnetic Material on the Platters off as well as mangling the Heads themselves.

If that is the case then because of Physical Damage you are unlikely to be able to do much you would need to take the HDD to a Specialist Data Recovery House and get them to dismantle the HD Din a Clean Room Environment and then attempt to recover what they can off the Platters.

However if the HDD was not running at the time or the NB was turned off when it was dropped you should be able to recover your Data with a Simple Data Recovery Application. Here is a short list of the better ones that are available but by no means a Full List of all of the Data Recovery Software that is available.

http://tinyurl.com/273ay5

http://tinyurl.com/rmvrv

http://tinyurl.com/yvrsl

http://tinyurl.com/yyk8cm

http://tinyurl.com/382vm

http://tinyurl.com/ynwnel

http://tinyurl.com/nc4kx

http://tinyurl.com/2wox7l

http://tinyurl.com/374d8b

http://tinyurl.com/djw6u

http://tinyurl.com/f73se

http://tinyurl.com/8bd3f

http://tinyurl.com/afu2j

While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.

Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.

However if you Absolutely need the Data instead of just being Nice to get back you should stop Immediately doing anything to this HDD and take it directly to a Data Recovery House like On Track at West End here in Brisbane and let then do the work. The more that you mess around with it now the harder it will be to get the Data Back and you'll be increasing your Expenses Dramatically in the Process.

The chances of 100% recovery will also be dropped drastically and any really important Data that you have on the drive may be perinatal lost for ever.

Col

This discussion is closed to new replies.