Question Locked

Laptop HD - High Temp

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Temp is 150F
All the fans seem to be working ok

The Laptop will not boot to the operaing system. I can get to the bios, and the list of safemode options (safemode doesnt work either)I am running spinright now to see if i can get it to at least boot to OS (windows XP).

Is a Laptop Hard drive operating at high temps a sign it needs replaced?

I havent worked on many laptop hardware problems before.

Thank You for your tips

9 replies

by rob miners

Laptops run fast microprocessors that can generate a lot of heat. The heat is mainly vented out of the bottom of the laptop but ventilation effectiveness is reduced when the laptop is placed on a solid surface. A hot laptop can suffer from reliability problems and a system that overheats can fail.
One way to help in this situation is to use a Notebook Cooling Chill Mat, something like this.

http://www.ao3.com.au/product.asp?manufpartno=AWE11US

And if you are feeling adventurous you could try this and reseat the CPU.

If the CPU heatsink is not clogged with dust and lint completely, you can use canned air and just blow it inside the laptop through the openings on the bottom and on the sides. It might not work if your heatsink is completely clogged.

Open the laptop case, so you can access the CPU fan and the heatsink.

Carefully disconnect the fan cables on the system board and remove the fan. If the fan shows resistence when it spins replace the fan.

Clean the fan and the heatsink with compressed air.

I would also recommend removing old thermal grease from the CPU and applying new grease for better heat conductivity. ;)

Some hard drives run hot all of the time.

Keep us informed as to your progress if you require further assistance. ;) :D


If you think that any of the posts that have been made by all TechRepublic Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D :-bd


How do I rate the answers to my posted Question?
Click on the answer. Click the Mark "Helpful" button displayed below the post. You may mark more than one answer as "Helpful."

by oh smeg

Because there physically isn't the metal there to act as a Heatsink that is available in a Desktop Computer. But saying that 150 is way too hot for any HDD to run at, it sounds much more like a CPU Temp when there is a problem.

None the less HDD's do still run much hotter in a NB then they do in almost anything else except a External Drive Case without Active Cooling. So you should use the HDD makers Testing Utility and test the HDD to see if it is actually working or has suffered any damage.

http://www.tacktech.com/display.cfm?ttid=287

The other thing you can do here after cleaning out the Air Passages is to use a Cool Pad like the one shown here. They are a [b]Must Have[/b] for every NB and extend their lives drastically.

http://www.antec.com/Believe_it/product.php?id=NzI=

Col

by snuffy09

(by the way its a HP Pavilion ZE5300)

I sprayed out the vents and fans with air. I also removed the battery it was very hot. the HD temp then dropped from 151 to 136. Spinright is still running. Cant find HD utilites for the drive SPS-DRV.

Thank you for your replies so far

by rob miners

rebadged. You can check the manual for a replacement.

http://h10032.www1.hp.com/ctg/Manual/c00246219.pdf

Try testing the drive by Running e-Diagtools
The following procedure describes how to run e-Diagtools. The individual steps might differ slightly for
different versions of e-Diagtools.
1. Select Start > Turn Off Computer (Shut Down) or Restart.
2. When the HP logo appears, press F10 to start the diagnostic test.
The first time you run the program, you are prompted to select the language for the program.
3. When the menu appears, press F2 to run e-Diagtools.
4. When the Configuration Description appears, check the list of detected hardware.
5. Run the basic test. Press F2 to start the basic hardware test. The results appear when the test is
complete.
6. If you intend to exit without running the advanced tests, press F4 to view the Support Ticket.
Press F3 to exit e-Diagtools.
7. Optional: run the advanced tests. Press F2 to open the advanced test screen.
8. Use the arrow keys and enter to select the test you want to run. Tests are listed only for detected
hardware.
9. Press F2 to run the selected tests and add the results to the Support Ticket.
10. After each run, press F2 to return to the advanced test screen, or press F4 to view the Support Ticket.

Run the laptop on Battery without the power cord until it drops its charge and then recharge it. A hot Battery loses charge pretty quickly. Try cleaning the contacts on the Battery. It may cool down when you have the heat problem under control.

Edit: forgot a link

http://www.batteryuniversity.com/parttwo-34.htm

I haven't checked this out yet but it may come in handy.

http://www.batteryeater.com/download.html

by balge

hi
if laptop is overheating you need to completely clear the airways - not with an airblast but open it up and clean the airways manually - Ive seen dust-bunnies solid enough to bounce in laptops before now
cheers

by snuffy09

I am requesting the Software/Operating system from the owner to reinstall windows. I have tried everything else.

I have been watching the temps continue to drop since i removed the Battery and cleaned out vents/fans. its now at 125F. I think there is a problem with the battery, when it is inserted and powered on the laptop works but a yellow light flashes on the front. I read up on it and it means the battery is not installed or its charging. the light never stops flashing, bettery in or not, and it gets very hot when it is in.

by rob miners

the Battery contacts and if that doesn't work replace it.

This discussion is closed to new replies.