2 replies
by jleri Accepted solution
by robo_dev Accepted solution
Typically the power switch is attached to the motherboard, and the AC adaptor is connected directly to the motherboard as well. The switch itself is only sending a signal to a switching transistor to allow the unit to power up.
The only thing to try would be to remove ALL components (battery, hard drive and CD drives, memory, cards) and see if you can get it to power on then.
I would inspect the power connector and jack closely and see if it has any looseness which might indicate that the connector was damaged or that the connection from the power jack to the motherboard were damaged.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending