Question Locked

Linksys Problem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Using a BEFSR41 Linksys Router connected to a speeds stream modem and through a switch, several Clients connected but only one or two will get on the internet, the others will not, anyone know what my problem?

4 replies

by rolmaldutis

You may want to check the DHCP settings in your linksys router and make sure that you are giving out enough IP addresses to your clients. Also you may want to try taking the switch out of the equation for the pcs that are not connecting and trying to connect directly into the linksys router. This way you will know that it's not the switch that's causing the problem. If you can't do that, then try using different ports on a switch.

by roguewarrior626

I have adjusted the MTU settings/Mac address clone, and it is giving out IP addresses, I can ping Yahoo's server from a workstation that cannot view a web page, so I know it is connected to internet but cannot view, and I have directly connected four PCs and only one out of four is getting on the internet. Maybe its the Internet Explorer, should I Unistall it and Reinstall? I'm Lost can anyone help?

by sgt_shultz

on the pc's that work and do not work.
perhaps it is a gateway setting, a dns setting or firewall setting different on the working vs non working boxes

This discussion is closed to new replies.