4 replies
by ssmith Accepted solution
by jc2it Accepted solution
Disconnect one of the working computers and connect the e-machine.
Does it work now?
If yes, then maybe bad cable or bad port on router.
If No, then your e-machine either has a bad NIC or a misconfigured NIC. It may be that you need to set the NIC in the OS to use DHCP instead of static IP.
Let me know if you need more help.
by ssmith Accepted solution
by jc2it Accepted solution
I was assuming that both of the computers you connected the router to were via a Cat 5 patch cable.
Turn off and unplug all of the connections to the router, modem and computers. Power cables and network connections.
Wait a minimum of 1 minute. Plug in the modem to the Internet then the power. Turn the modem on, wait 30 second to a minute.
Plug in the cable from the modem into the uplink port on the router. Plug in the power for the router. Wait 30 seconds.
Plug the cable from one of the four ethernet ports into the NIC on the new computer. Plug in the power to the computer. Turn on the computer.
By removing the power and network cable from all of the devices you ensure that the ports and services all get reset.
Did you use the same cable and router port for both computers? If not then try this. Laptops sometimes are set to only use the Wireless network and not the cabled network, make sure you are connecting the same way on both machines.
How many NIC ports are on the new computer? Often you will see two. Which one are you using? Try the other.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending