Question Locked

Local Lan works only when connected with Cisco VPN

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello
i have a very strange problem . I have a cisco vpn client installed on my windows xp machine to connect remotely to client sites or to connect to our work network from outside. When iam in the local lan in the office , i cant access the file and printer sharing windows drives unless i initiate a VPN connection to a remote site . This is quite reverse to the phenomenon when the local lan gets disabled when on the vpn. this is the opposite.
If i remove the 'Client From Microsoft Networks' and add it back it works but on the next reboot i have the same issue.

Anyone have any ideas ?
Thanks

3 replies

by netwrk_admn

Are you on the same subnet as your local lan? did you change it for testing purposes. Maybe some more information is needed, as in are you attaching virtually to a router/firewall at your remote location? Are you currently on the domain? You may need to reinstall your networking drivers or configuring your card to a known configuration.

by venkat.srinivasan

Yes the subnets are same. I didnt change it at all. In fact removing the vpn client altogether doesnt help either. Same problem .I cant login to my domain or access our local network drives without using the vpn client connecting to A remote location. Tried adding/removing the card also . No luck. Only when i remove and re-add Client for Microsoft Networks it starts to work. But on the next reboot it begins to fail again.
I also disabled the 'Stateful Firewall On' thing on the cisco vpn client.

Thanks

This discussion is closed to new replies.