Question Locked

LOCATION OF CMOS BATTERY

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I HAVE A SONY VAIO PCG-7A2L AND WE CANT FIND THE CMOS BATTERY. WE HAVE TRIED FOR DAYS...
ANYONE KNOW EXACTLY WHERE IT IS ON THIS MODEL?
THANKS

3 replies

by thumbsup2

... it's built into the motherboard. You can't remove it.

by oh smeg

Smart Socket Technology where the power supply for the RTC when the computer is not in use is provided either directly by a Smart Socket below the IC or by incorporating the Smart Socket Circuity onto the M'Board.

This comprises one or more Electrolytic Capacitors along with Voltage Regulation Circuity to provide Power for the RTC when the unit is not in use and or the Main Battery is flat.

This is better as it doesn't need replacing regularly or run the risk of leaking over time. It is also recharged when the Main Battery is in the NB and also when on Mains Power so it acts like a Rechargeable Battery but is far cheaper saving you money in both Parts and Labor that would otherwise be require to be spent every few years to replace the CMOS Battery.

Sony like all the other NB Makers for security uses a Separate IC to hold any Power On Passwords so even if the BIOS Chip was to be removed from the M'Board you will still be unable to bypass the Owners Security and gain access to their Data if you had received the NB from a Thief. The BIOS Chips are also soldered onto these M'Boards so you have 2 choices here buy a New M'Board or take it to a Authorized Sony Service Agent to bypass any security that was used.

This is all stated clearly in the owners manual if you care to read it.

Because the components on the M'Board are all Surface Mount you require a special soldering station to remove and replace dead components. Well used to have one of these 25 odd years ago that allowed small scale repairs to be done to any Surface Mount Circuit Board and these started around the 40K + Disposables mark and you are unable to do anything to one of these M'Boards without at the very least a Soldering Station like that or better. The proper Repair UV Welding Stations for this type of work start around the 3.5 Million Mark and work up from there. Because of the costs involved in these Soldering Stations unless you are working for the Circuit Board Maker it is far cheaper to replace the Circuit Board than to attempt to repair one. If you attack any Surface Mount Circuit Board with the wrong type of Soldering Station you will completely destroy the Circuit Board so people with any sense don't even try.

[b]The reason that you can not find a CMOS Battery is quite simple really there isn't one.[/b]

Col

This discussion is closed to new replies.