Discussion Locked

Logging into Novell 6.0 via IP not IPX

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are experiencing problems with our computers logging into the Novell 6.0 servers under IPX instead of IP. The prefered protocol on the workstations is IP. Sometimes the machines log in with IP but mostly with IPX. How can I force them to all log in with IP all the time? We still need to run IPX due to some applications though. Thank you!

5 replies

by ralesky

At the Novell login screen be sure the server field displays the IP address of the server rather than the server name.

by budthegrey

The best way to guarantee an IP connection is to un-install the netware client, then re-install it, and choose a "custom" install. This gives you the option to install "IP Only" and "Remove IPX if present". If you don't access any other services that require IPX, it's safe to remove it.

by duster52

Since you IPX, you can't remove it from either the workstations or servers, therefor you need to implement SLP. There are many TIDs on Novell's site about setting this up. It is straightforward and will guarantee IP connections. The actual description of how SLP works is too long for this posting...look at the manuals Novell has online.

We have 16,000+ users, 150+ Novell servers, and SLP is implemented throughout. We always get IP connections.

by netmutt

Check the server configuration and remove IPX if it is configured (unless you have applications that require it). Also check to see if an NLM called SCMD is loaded. This is the compatability mode program that answers IPX calls. Remove it if IPX is not needed on the server. Finally, the only thing that will stop clients trying to authenticate using IPX is to remove the protocol from the workstations. To do this, re-install the client using a custom installation and select IP only.

This discussion is closed to new replies.