Discussion Locked

Loss of network + Clear ARP Cache Error

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a windows xp workstation on a dell optiplex machine.

I do some coding on it, and I have installed a Microsoft Virtual adapter (see network info below) and used netsh to map a port on the LAN IP to the private, virtual ip.

About 10 times a day, I seem to lose network connectivity for new connections (existing TCP/IP connections, such as Remote Desktop are not affected), but I cannot surf to new pages, etc.

Rebooting and disabling/enabling the LAN adapter worked to fix the problem. It also works to "Repair" the connection- but when I do, I get this error:

Windows could not finish repairing the problem because the following action cannot be completed:
Clearing the ARP cache

HEre is the output of:
>netsh routing ip nat dump

# ----------------------------------
# NAT configuration
# ----------------------------------
pushd routing ip nat
uninstall
install
set global tcptimeoutmins=1440 udptimeoutmins=1 loglevel=ERROR

#
#NAT Configuration For Interface dpix
#
add interface name="lan" mode=FULL
add portmapping name="lan" proto=TCP publicip=0.0.0.0 publicport=1666 privateip=172.16.1.1 privateport=1666

#
#NAT Configuration For Interface VIRT
#
add interface name="VIRT" mode=PRIVATE

popd

4 replies

by techrepublic

I recently removed the program that required the portmapping. So I removed the portmapping entry and disabled the virtual adapter.

The problems went away. Not sure if it was due to the portmapping or the virtual adapter. Oh well.

This discussion is closed to new replies.