Question Locked

loudspeakers fail to work

0 helpful
27 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently replaced my monitor. At once the loudspeakers stopped working. I tested the power supply line (AC/DC) on another PC with similar loudspeakers and all seemed good. I concluded that I had in replacing the monitor somehow damaged my loudspeakers, perhaps by breaking a wire inside the cladding. So I bought another pair of speakers and installed them (with a different supply line, as the DC voltage for the new ones was different). The new speakers do not work either. Clearly the power is getting through, because a light comes on in the right-hand speaker.

As far as visible things go, all seems fine. I use Seamonkey for email, and should get a tone whenever I start to download mail, when downloading is finished, and when new stuff arrives on the server. I get the visible indicator, but no sound. Similarly, when I try to play music, with Windows Media Player, all looks fine but I get no music.

I am running XP on ASUS Terminator P4 hardware. I seem to have the loudspeakers correctly plugged into the line out connector.

What should I try to restore sound output?

27 replies

by rob miners

try other ports on the card. Is the card colour coded, if it is plug it into the green port. If it is not colour coded plug it into the port that says speakers. If it is powerd by USB try it in the blue port.

Keep us informed as to your progress if you require further assistance. ;) :D

by john.a.wills

either of which might from the picture in t he Terminator P4 manual be the Line Out Connector, neither of which works. I wonder whether there is something in the controls I should look at.

by john.a.wills

...says everything is fine and I should be hearing music, but makes no suggestion as to where I should look next.

by rob miners

post as that may be where your problem lies.

Keep us informed as to your progress if you require further assistance. ;) :D

by older mycroft

Despite your detailed initial post, you were rather vague about the placement of the speakers. Could you perhaps be a bit more descriptive as to where these speakers actually are, in relation to this new monitor?

This could be a fairly simple problem, just wrapped up in ambiguity. ;)

by john.a.wills

By "cladding" I meant the plastic insulation around the wires.
The loudpseakers are one on each side of the monitor, which is on top of the PC.

by thumbsup2

You said this happened when you replaced your monitor. Does this new monitor have built in speakers? If so, did you run software to install your new monitor? If so, I'm sure all that has happened is that your sound-out configuration is set to be the monitor, but you're plugging in external speakers instead of the monitor. Try running the sound cable from the monitor to the SPEAKER port on the back of the computer.

Alternatively, reconfigure the speakers so it's set to use desktop speakers in Control Panel -> Sound, Speech and Audio Devices - > Change the speaker settings -> Speaker Settings -> Advanced -> use the drop down arrow to select your actual speaker setup instead of the monitor.

If the monitor does not have built in speakers, please disregard this post! :D

by thumbsup2

... I've taught in a text based environment before. You quickly learn to be as explicit as possible in as few posts as possible, or more questions ensue which takes more time to answer. Of course, I'll never attain the 'most posts in a week' award that way! Oh well! ;)

by john.a.wills

No spare wire either, just the power connection and the multipronged plug for the video.

by rob miners

To adjust speaker volume
Open Sounds and Audio Devices in Control Panel. Check to see if the Mute box has a tick if it has remove it.
On the Volume tab, under Speaker settings, click Speaker Volume.
Move the slider controls to the right or left to increase or decrease the volume for each available speaker.
To move each slider control at the same time while saving their relative positions, select the Move all slide indicators at the same time check box.
To return the speaker volume to the default positions, click Restore Defaults.

To open Sounds and Audio Devices, click Start, click Control Panel, and then double-click Sounds and Audio Devices.
The number of speakers for which you can adjust the volume depends on your sound card.
Low frequency speakers include subwoofers or similar devices connected to your computer.

Using Volume Control
You can use Volume Control to adjust the volume, balance, bass, and treble settings for sounds played on your computer or by multimedia applications. You can also use Volume Control to adjust the level of system sounds, microphones, CD audio, line-in, synthesizer, and wave output.

Open Volume Control.


To open Volume Control, click Start, point to All Programs, point to Accessories, point to Entertainment, and then click Volume Control.
If you have a sound card, you can use Volume Control to control the volume and speaker balance when you play audio files.
For information about using Volume Control, click the Help menu in Volume Control.

Also try plugging into different ports. Depending on the age of the soundcard will depend on how many ports there are.

Keep us informed as to your progress if you require further assistance. ;) :D

by rob miners

when are we going to see you in a TR Member Spotlight interview. I am dying to hear your story. ;)

PS. and your voice :D

Photos would be good too. :p

I'm not asking too much am I? ;)

by john.a.wills

and got nowhere: the mute box was not ticked, changing the volume helped not, etc.

by john.a.wills

I don't want speech recognition, just that my loudspeakers work.

by older mycroft

That your Output socket(s)[b]THINK[/b] they are Input socket(s).

I don't think there is any previous mention in this thread as to which soundchip you have. Depending on how sophisticated it is, it may have altered the function of the socket you are using. ;)

by thumbsup2

... he previously stated he was using the LINE OUT socket and we tried to tell him that wasn't the correct one.

by rob miners

I think that I would like to be able to be there, just to be able to check it out myself. :D

by older mycroft

When I clicked the wrong icon, I reversed the functions of most of my sound sockets.

If your soundchip is sufficiently sophisticated it can accommodate/handle signals going both ways - but only going one way at a time. 'Input - Output' can easily become 'Output - Input' (or any combination) at the click of the mouse! ;)

by john.a.wills

I have followed the instructions, so far as they were relevant, in the URL that was posted by Jacky. The speech gets shown but does not get to the speakers (I tried two output ports on this).

by john.a.wills

and now I will be trying 4 ports for every suggestion, but the installation of the driver did not work. I did try uninstalling first. BTW, I got no interactive chat in either process: does that mean that I did something wrong (I double-clicked to start the programs).

by rob miners

Ok lets check the BIOS to see if the sound is set to Auto, Auto under OnBoard PCI devices control. If it is disabled change it to Auto, Auto.

If it is OK boot up in Safe Mode by repeatedly pressing F8 at startup, go into Control Panel and open Add Remove Programs and uninstall AC97 or SoundMax. I am not sure what it will show up as. Open Device Manager and under Sound Video and Game Controlers right click on each item and select Uninstall.

Restart the PC normally and and when Windows asks for the drivers direct it to the new drivers that you unzipped. Hopefully it will default to standard settings which are desktop speakers.

Keep us informed as to your progress if you require further assistance. ;) :D

by john.a.wills

I had a friend in to look at things and he solved the problem fairly quickly. He thinks I was using the wrong hole, though seeing that I tried every experiment you good people have suggested in all the holes I do not see how that can be. I gave him my old speakers. And I thank all you for your efforts.

This discussion is closed to new replies.