Question Locked

lowering HD temp in lap

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

It's my HP lap dv6184ea ---the dv6000 notebook famely--.Running vista home premium danish.

The harddisk is from 48 to 60 degree C. It is growing high when the lap is ideling. Lower when the GPU cooler is running during work.
I think it is at bit too high and im burning my hand if i touch the lap button.
I cant install
Mobile Intel 945GM Express Chipset Family Driver
05-2007 7.14.10.1187 A ? Version
7.71M even though that my wizard sayes it is intel i945PM i'm using..??
I'd downgraded my bios from F26-27 to F15

That lowered the temp a lot, but still the disk is only recommended up to 55C.
Is there anthing i can do ??

6 replies

by oh smeg

http://tinyurl.com/ny8zn

Which has cut down th temp of the HDD to such an extent that you can now touch the Mouse Pad when the unit has been running for several hours now. It also allows the Video Display to work better as well.

Not only does it keep the NB cooler it also draws all the dust out of the fans that suck the airborne dust away and the Air Intakes of the NB no longer need cleaning either as all the big bits of dust get sucked away and the air that gets sucked into the NB remains clean.

Col

by nisc

an answer. Buy a cooler...!:-) But i a way i expect that their is another way to cool down the lap. It has been cooler..with XP and just a 20 Gb of the 111/120 GB HD..
With Vista and 50GB on disk, a newer Bios and my be some miserable adjustings the lap had grown up the heat. It is only just undernead(!) the HD it is so hardly warm..

by oh smeg

If you are unwilling to do the proper thing to keep temperatures down you are stuck with working with limited technology and making sure that there is a solid contact between the HDD Tray and Frame of the NB so that Heat can be transfered from the HDD to the NB's Metal Frame which is used to conduct the heat away from the HDD. At the same time you need to inspect the Air Intakes for blockages or a build up of dust and other rubbish that can clog the things up completely.

However I can say from past experience that you are much better with a NB Cooler as they keep the NB's both Clean and far cooler that they otherwise would be. The number of dead NB's that I've had to replace M'Boards in because they got too hot is way over the top and is an unacceptable number in my books, particularly as NB's are the Top Selling Product that they are now and do not appear to be made as well as they could.

The basic thing is that the longer you run a NB the hotter it's going to get. But if this is of any help I got a severe burn on one of my hands from a SCSI HDD fitted to a server which had only been running for 3 hours when I touched it.

Col

by nisc

I cant stop the HD from running in Vista powercontrol..Tried 2 min to power down HD, but i dos'nt.

I would like to use a spindown command from the CMD..But cant find it on web..:-|

This discussion is closed to new replies.