Question Locked

Mapped Drive Errors

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using SBS 2003 with seven XP clients. Each client has a mapped drive. They have worked fine for several months without any problem. Since switching our ISP two weeks ago, file sharing has been acting up.

For example. Client A will be able to access Client B and C's mapped drives but will receive a "local device name already in use" error when trying to connect to Client D. However, all other clients will be able to access Client D's mapped drives without any trouble. All clients have the same share settings.

Also, networked printers suddenly go offline for no reason but maintain a "ready" status.

Any ideas? Any help would be greatly appreciated. Thanks.

3 replies

by sgt_shultz

is the drive mapped via login script? is sbs out of licenses? is nic pwr saving on printers? anything in the event log on server or client?
Those are my knee-jerk ideas.
I had the same 'device name in use' when I had a drive mapped in a login script. the server was down when the client restarted and the user told the computer not to attempt to connect the drive again. try having the user logout and login again to see if the problem gets fixed that way then investigate any login scripts that might be in play.
printer - need more detail. i wonder if you have some network connectivity issues. maybe related somehow to wiring in the new isp router or something. maybe try locking nic down to 100 or 10 mb full duplex and check the power settings on the print server. don't let it or it's nic hibernate or go into low power mode...
just 2 cents, we really need a lot more info.

by robotech

The DNS settings may be incorrect. Make sure that the SB Server is the primary DNS server for the workstations, and then your ISP's servers as the secondary DNS servers. Also, on any machine that has a problem, disconnect and reconnect all network drives. Before reconnecting though, go to a command prompt and type: "ipconfig /flushdns" without the quotes.
That should clear out all old DNS entries and allow mappings to work with the new DNS setup.

This discussion is closed to new replies.