Discussion Locked

mapped drive loses path after 5 minutes

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

over my ipsec greenbow vpn connection. I can ping it and it will come back to life. When I ping the remote node, it will timeout on the first two packets, but the second two will respond fine and I can then browse my mapped drive.

I dont seem to have any tunnel problems.

I tried net use persistant and that didnt help. I tried to add the remote node ip address in the network host file and that didnt work.

I should say that this is a customer of mine. the vpn system was working fine until he decided to get vonage. I tried to manually set the mtu to 1350 as well as foward ports 500 50 and 51 udp.

I am out of ideas and am in need of assistance

1 reply

by philip.grogan

This may help if you use a router, wireless router or internal network accross the internet to a coporate VPN connection.

Depending on your company's IP addressing structure it is common to have a clash of routing addresses. Most CISCO and Belkin wireless and DSL routers use DHCP on address ranges 192.168.*.* . If your company uses this IP range you may experience routing issues as most firewalls will have this range used for DMZ's because its a private IP range.

IF this is the case, if you change the range of addresses you use on your home network tom something like 10*.*.* or 192.168.200.*, it may fix the problem.

Philip

This discussion is closed to new replies.