5 replies
by lionjon Accepted solution
by ic-it Accepted solution
Power off the computer.
Connect the top connector of the IDE cable (the connectons off the broad wire connector) to the top drive and the middle connector to the lower drive.
Verify that the bottom connector of the IDE cable is connected to the motherboard.
Verify that both have a power connection.
Power up the computer and see if both drives appear.
If they don't, then open Disk Management and see if they both have drive letters assigned.
Let us know if this solves your issue.
by lionjon Accepted solution
by thumbsup2 Accepted solution
Things like this don't just come loose all by themselves. Obviously, someone was messing around inside and knocked something loose.
So, how about telling us the WHOLE story now, please? ;)
by lionjon Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending