Question Locked

Motherboard swap, now no boot

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
ok i am totally lost. i had 2 pc's. they both worked fine. one AMD one Intel. the intel one started messing up, so i reset the cmos, and it wouldnt boot anymore. it would get to verifying DMI Data pool and sit there. so i decided to take motherboard/cpu from the amd and put it in the case the intel was in because its 50X better. put it in the chase and nothing. i cant get it to show a display. the fans kick on but no boot. i have reset the cmos, took the cmos battery out, changed out the ram with 4 different sticks, tryed a different GPU, what else could it be?

5 replies

by bogdan.botezatu

Because you haven't replaced the power source, too, I suspect that there's the problem. Perhaps the ATX2 is fried and does not supply the necessary "juice" for the CPU. Try changing the power source.

by jszivos

I've experienced similar problems with my old HP. Make sure that you are using the same video adapter for the AMD that it was using before you moved it. If it had a PCI video card then plug the monitor into that, or whatever be the case... Put a CD into the CD drive. If you see the CD-Rom light come on then thats a good sign. If you hear the CD spin then thats an even better sign.

Fixing computers is all about isolating the problem. You want to look for signs of a computer booting up. You say that the fans spin, but there is no display. The computer maybe booting and you just can't see it. By putting a CD in, you can actually find out if it is booting.

Also, did you screw the motherboard to the chassis or the risers. If you mounted it to the chassis then you could have friend the thing. You can actually take the entire mobo, power supply, hard drive and assemble it outside the case. I typically do this when I'm having problems with the motherboard. It's dangerous but it allows for easy access and troubleshooting.

Let us know what you learn or if there are improvements.

by eclopton

ok the cd rom spins with a CD in it but still no display. both boards. same problem. i have them out and on the foam from the motherboard box with ram, GPU, CD-rom and power supply and still nothing. i dont really know what to try next. both the pcs worked when i took them apart now between all the parts i cant make 1 work... i dont know where i could have went wrong. i built both pcs to begin with... any more ideas of what could be happening?

by eclopton

ok now the intel board is booting. so i tested all the ram and all the GPU's and all the power supplys. so now im leaning towards saying something in the amd board/proc is bad, but the cd still spins so im still tweaking. any suggestions would be great.

This discussion is closed to new replies.