Question Locked

mount a remote CD in Windows XP Home edition?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm unix admin savvy but a Windows administration rookie. I'd like to do something that seems like it ought to be trivial, but I can't find a reference to exactly how to do it.

I have an ultra-portable that runs Windows XP Home Edition and has no local CD drive. (it's a Sony VAIO UX280P). I want to be able to:
a) install software from a remote CD-ROM drive that is installed in another Windows XP Home Edition workstation over a local LAN connection, and
b) perform backups from the UX280P to a remote CD-RW or DVD-RW drive installed in a Windows XP Home Edition workstation over a local LAN connection.

I have no Windows Server or XP Professional Edition hosts (or unix hosts) so I have no access to any of their facilities.

What software utilities exist in XP Home Edition (or are available relatively cheaply) that will allow me to "export" a CD or DVD drive from one XP Home Edition workstation and "mount" it for read or write access on another XP Home Edition workstation on my home network ?

Thanks for your help.
-frustrated newbie

7 replies

by charliespencer

Can I assume you've already established a workgroup (the Windows term for a peer-to-peer network)? If not, let us know and we'll come back with info on how to do that.

Assuming you have, you need to share the CD drive. In My Computer, right-click the CD drive and select Sharing. Select "Share this folder" (yeah, I know, it's a drive, not a folder) and give it a name like CD. Click OK. The drive's icon in My Computer should change slightly; it should now have a small hand holding the icon, kind of like a waiter offering a tray.

On the Sony, click Start, then Run. In the Open box, type:

\\nameofdesktop\nameofCDshare

For example, if your computer name is 'PALMETTO', and you named the CD share 'CD', you'd enter:

\\PALMETTO\CD

Click OK and you should get a Window with the contents of the CD drive.

Incidentally, you can access the desktop's C: drive by entering:

\\PALMETTO\C$

by dwneumann

Thanks Palmetto. That was helpful, and it allows me to install software from a remote CD-ROM drive (my criterion 1), but it doesn't seem to allow me to write to a remote CD-RW drive (my criterion 2). I have selected the "Allow network users to change my files" option in the Sharing tab but it doesn't recognize a blank disk as a valid shared folder. I get an "invalid operation" error when I try to open the folder on the Sony (opening the folder works fine on the PC).
At least I'm half way there, but I still have no way to backup to a remote CD-RW or DVD+R drive. Am I doing something wrong?
Thanks,

by charliespencer

One step at a time. You've successfully shared the drive, and you've proved you can access it. In order to write to it, you now have to assign that share a drive letter on the laptop.

On the laptop, double-click My Computer, then Tools, then Map Network Drive. In the Drive box, pick an unused drive letter to represent the CD on the desktop. Most people pick the lowest available drive letter, usually E: or F:. In the Folder box, enter the desktop name and CD share name, i.e. \\PALMETTO\CD. Check the box marked "Reconnect at logon" and the drive letter will be permanent. Click Finish, and a new window will open showing the contents of the CD drive; you can just close it.

You will now that drive letter in My Computer. More importantly in this case, you'll also see that drive letter in your burner software.

Since you're going to be burning on the desktop, you may want to reverse this process. I've had better luck using the computer with the burner to pull data than trying to push data from the non-burning computer. Just reverse the process: set up a share on the laptop, map that share as a drive letter on the desktop, and look for that letter as the source of your burn.

by dwneumann

Thanks Palmetto. Your helpfulness is appreciated. No luck mapping drive letters though. I tried it both ways... I could map the desktop's CD drive onto the laptop but it doesn't show up in the backup software's drive list, and if I try to access that drive in Windows Explorer I get an error "E:\ is not accessible. Incorrect function".

When I tried it the other way around as you suggested, I could share the laptop's C:\ drive to the workgroup and map it as a drive letter on the desktop, but the backup software on the desktop won't allow me to access its contents. I get a "file system in use" error.

Argh. I long for the lego block approach of unix :-)

by mohammadsuhaimi

create a folder on the desktop than share it for you to access from your laptop. Then you may use Nero Burning program in your laptop (I'll assumed that you has installed it) to create image file with extension .iso or .nrg. Then transfer it to the desktop pc, then using Nero Burning program in your dektop to burn it on CDR/CDRW.

by badpaul

Share a folder on the desktop

Mount that folder on the desktop to the laptop.

Then move whatever data you want from the laptop to the shared folder residing on the desktop

Then RDC [Remote Desktop Connection] into the desktop, and run the burning software. If XP Home does not have the RDC, you can easily download it from Microsoft, and install it to the laptop.

This discussion is closed to new replies.