Question Locked

Moving existing 2003 AD Server to a new server completely

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Sorry but I am realatively new to moving Servers but I have the following issue I need direction on.

We have a Windows2003 server curently providing AD, DNS, DHCP, WINS, for our network. We have about 50 or so users. I have just purchased a new server from Dell with 2003r2 on it.

What do I need to do to move the complete old 2003 server to the new 2003 server so i can take the old server completely out of the network and not have to redo the logons on every pc?

Is there a process somewhere I can look at to follow to replace this server including moving the same IP from the old server to the new server?

if you wish to send directly to me my email address is "mahvisions@yahoo.com"

thanks

5 replies

by bart777

First go get disk2 of your R2 set. Go to the old server and run ADPREP from the disk. this will update your servers schema to teh correct level.
Next you will run DCPROMO on the new server.
Make this new server a Global catalog.
Transfer teh FSMO roles from the old server to the new. http://support.microsoft.com/kb/324801

Setup WINS and DNS on the new server.
Move all shares and printers to the new server.
Configure DHCP but don't authorize it. Make sure that the new server's IP address is replaced in WINS and DNS for the new DHCP scope.
Shut down DHCP on the old server.
Authorize DHCP on the new server.
Change your logon script to point to the new server for any related mappings.

Now you can run DCPROMO on the old server and down the box.
Rebuild to your hearts content.

Now you will probably run into an issue with your users having connectivity problems depending on what your DHCP lease time is set to. If you have the time change the lease time to 8 hours and you will be golden if you choose to do this over a weekend. The normal lease time is 8 days so it could be 4 days before a PC got the correct settings.
Also there may be some PCs out there that will have the DNS server hard coded. They will have to be touched or...
After you shut the original box down you can add the old servers IP as a secondary address on the NIC in the new server.

Hope this helps.

Best of luck.

by mahvisions

I have the new server on order from Dell and should be recieving it within 2 weeks. I will follow the instructions you have laid out. Thank you for the informations.

by mahvisions

Yes, I would have done it that way, but the new hardware I am getting is a significant upgrade to what I already have.

The current server is a quick rebuild of a system that had a raid1 that both drives crashed and the raid backplane had problems as well. So I quickly grabbed a hard drive and made an IDE Server from it and had to rebuild all the accounts and everything from scratch.

The single IDE there is doing everything it is suppose to but it is an old disk in a very old server.

The new server upgrades all the internal components (CPU, MEMORY, MB, New Pieces, etc.). The existing server I will take offline and eventually use some spare SATA drives and build a competent backup Server this summer.

Thank you for the suggestion.

This discussion is closed to new replies.