6 replies
by brian Accepted solution
by pshiflet-24 Accepted solution
I assume you mean MPLS networks (multi protocol label switching) and I am not sure what you are trying to do. The provider of the IP addresses should have provided a router that all of your public addresses are routed to and also provided you with the network settings including the subnet and gateway (probably the 1st of your public IP addresses). From there you can setup each individual public IP with its own router using the same subnet & gateway, just a different public IP in the same subnet.
So, you would have the router provided by your ISP attached to a switch with a bunch of routers attached to it (one for each IP being used). The LAN side of each of those routers would be individual private networks.
Is that what you are asking or wanting to do? Please let me know if that helps or you have further questions. Thanks.
by cmiller5400 Accepted solution
by brian Accepted solution
by pshiflet-24 Accepted solution
by brian Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending