Question Locked

msconfig

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I type in "MSCONFIG, I go to "SERVICES" I would like to know which services I need and which services i do NOT need? I know I leave the "REMOTE PROCEDURE CALL" boxes checked, or my computer will shut down. I would like to make my computer boot up faster. thank you.

17 replies

by weban112

have u tried dissabling most of the services that run during start up under msconfig?

by tompsheridant1

I would like to know precisely which services can be dis abled and which services can NOT be disabled?

by sgt_shultz

if you want your computer to start up faster maybe try removing old software including the gunk-ware that may have come with your computer when it was new. also defrag your computer if you haven't in a while.
just where is it taking long? at the 'black screen' part or at the 'loading profile' part? can you tell?

by older mycroft

Download it from here:

http://www.overclockers.com.au/sandra.php

I know it's in Australia but it's by far the fastest mirror site I have used.

Install and run it, choosing the Full Diagnostic mode. It will list all services that are currently set to load, that you do not require.

You can then safely choose which of your presently loading services to get rid of.

Also, unlike every previous post, it is impartial.

by ic-it

Hmmm, Someone had to make programming decisions. It is no more impartial than the Elder Geeks. ;-)

by older mycroft

You can download it from:

http://www.winpatrol.com/

Once it is installed it performs a large array of functions, not least of all, it tells you when any program is trying to create an autostart - if it is a program you are not expecting you can deny it access to your system.

It can list all startup services / programs - some of which will not appear in msconfig. You may even notice some detritus left over from something you thought you had uninstalled.

You can double click on any entry and WinPatrol will tell you what is known about that particular program and what it's function is, also whether it is system critical or not.

by sgt_shultz

if this were my problem to fix, i'd peek in the event logs on the box and i would try logging in with another profile ('administrator' maybe?) just to see if that loaded slowly also.

by sgt_shultz

maybe you should use msconfig after all.
here is a snippet from mskb article about how to 'clean boot' xp using msconfig:
(start/run/msconfig )
The System Configuration Utility dialog box appears.
Step 2: Configure selective startup options
1. In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.
2. Click to clear the Process SYSTEM.INI File check box.
3. Click to clear the Process WIN.INI File check box.
4. Click to clear the Load Startup Items check box.
5. Click the Services tab.
6. Click to select the Hide All Microsoft Services check box.
7. Click Disable All, and then click OK..
8. When you are prompted, click Restart to restart the computer.

otherwise, i pretty much google the service name and figure out if it is something i want to keep or not.
there is an mskb article that discusses the services that are needed but i cannot find it at the moment. plus you did not mention your os?

by tompsheridant1

would clearing the sys ini/win ini box mess up my computer because I read somewhere that these are files the system needs to function correctly and messing with them could cause your computer to not work at all? right?

by tompsheridant1

there are 2 check boxes named "REMOTE PROCEDURE CALL" with the checks in them, I leave those alone, right?

by older mycroft

Because if you had, you wouldn't need to ask the above question.

Depending on your OS setup, SANDRA will advise you which 'remote proc' services you can do without.

Run SANDRA before asking anymore questions.

by captbilly1eye

To change which programs automatically start when you boot, go to Start - Run and type [i]msconfig[/i]. In the System Configuration Utility screen that opens, click on the Startup tab. Here you'll see a list with checkmarks in front of all those programs that are set to start up every time you start Windows.
You can remove the checkmarks from those programs that you are sure you do not need to have automatically running, click Apply and OK. Reboot to have changes take effect.

Reducing the number of programs that run in the background will free up resources and make you system run faster and smoother.
You can re-check items if you later want to have them start at boot again.

To see what [b]Services[/b] are set to run with Windows, go to Start - Run and type [i]services.msc[/i]. In the Services window that opens, you will see a list of all the running Services (the ones that are listed as 'Started.'
Here is where you can download a good article about Services in Windows XP and which are safe to disable to improve performance: http://tinyurl.com/3bfsxh

Note: you can also disable Services in the [b]System Configuration[/b] window (msconfig), but in the [b]Services[/b] menu (services.msc), you will see a description of what each service is for.

I hope this helps.

This discussion is closed to new replies.