Discussion Locked

Multi-booting win and linux.

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I currently dual-boot between win98 and suse 6.4.
(well, i load suse from floppy), but i would like to add win2000 and red hat to my 30 gig hhd, and boot with partition magic or win2000 or lilo. I beleive there's a limitation on where lilo can be installed (below 1024 cylinder). My question is:
1.Is the 1024 limit the physical or logical limit reported on my system, i think about 2gig or 8gig
(i have a eide ata33 ultra dma); and
2.If i use partition magic, does it matter where i install lilo in the hhd? ( as long as it's located in it's own primary partition, /boot or /root).
3. If i install lilo in the mbr, can it boot win2000?

1 reply

by katurner101

I dual boted win2k, and red hat 7.2 and they worked extremly well using boot and partition magic. first, make win2k approx a 1.8 Gig partition, then make an ext2 primary partition that follows for 'linux'. make this patition what ever size for applications. Next make a partition for the swap file( i believe the limit is 2G for the swap). if there is data you want both to see make sure you create a FAT partition for this.
install win2k, before 'linux'. the MBR will be confused otherwise. when installing 'linux' let LILO not GRUB be the boot control.
after installing 'linux' open windows, goto bootmagic and add the linux boot to it and your done. after words i've heard that there are several ways to get both win2k, and' linux' to both recognize the data in the FAT partion you created.
good luck
if you find the way to get them both to read post it . thanks

This discussion is closed to new replies.