When you apply power, you should hear a series of light clicks, as the drive resets, and the soft whirring sound of the drive spinning.
Several things can happen to drives that prevent them from spinning up properly.
If all hope is lost, and you do not plan the spend a lot of money for a recovery service, here are several things to try:
1) if the drive is not spinning up, the main bearing may be stuck, so try to gently 'flat spin' the drive (shake it while twisting). Sometimes the inertia will get the platter unstuck.
2) Freeze the drive. Freezing can temporarily fix certain types of bearing problems as well as certain types of electronic faults. Freezing a hard drive works about 1/2 the time.
I had one 40gig drive that would spin up, but was not being recognized by bios. After putting it in a bag and freezing for eight hours, it worked for approx ten minutes (then started making some very bad noises). Repeating the process over and over allowed me to recover several hundred MB of photos from a friend's drive.
http://geeksaresexy.blogspot.com/2006/01/freeze-your-hard-drive-to-recover-data.html