Discussion Locked

'My Computer' lock-up

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

If I use windoze Explorer, or type 'c:\' in the Start-Run window, I can happily explore the root (and subsequent directories of my C: drive.
However, If I launch 'My Computer' I can see the drive, but when I try and explore it, the window hangs up and has to be terminated using the old 'three fingered salute'.

What could be causing the problem? I have tried everything from registry cleaning, to defrag and scandisk ?

Any help greatly received
MB

7 replies

by mlsnead

I have had this problem before with my IBM thinkpad. Unfortunately the only way I was able to stop it was to reformat and install from scratch.

by mbutton

Thanks for your commments.

But I think I can live with the 'minor' upset - without a reformat.
If I select a network drive, hit back, and then select the C drive - everything is cool !?

Maybe I can convince upper management that I need toupgrade my PIII to a P4, and let someone elese deal with it !

Thanks agian for your input.
MB

p.s The computeer in question is a Thinkpad A20p - maybe it's an IBM thing.

by mike (from canada)

Did you try waiting? if so, then Try re-installing Windows. If that fails, then it is probably your hardware that is causing problems. take out one hardware component one at a time until the problem is discovered and then replace the faulty part.

by mbutton

Hi Thanks for the feedback.

Unfortunatley, it's an IBM laptop, and I would have to dismantle it to get at the components.

I think I can live with the 'minor' upset - without a reformat.
If I select a network drive, hit back, and then select the C drive - everything is cool !?

Maybe I can convince upper management that I need to upgrade my PIII to a P4, and let someone elese deal with it !

Thanks agian for your input.
MB

by mike (from canada)

Did you try waiting? if so, then Try re-installing Windows. If that fails, then it is probably your hardware that is causing problems. take out one hardware component one at a time until the problem is discovered and then replace the faulty part.

This discussion is closed to new replies.