Question Locked

My New Motherboard doesnt want to start correctly

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Everything powers up on my board. I get no bleeps from the bios to tell me if there is a problem. I get no picture on my screen so this means I do not know the version of my bios but it must be defultfrom factory. All the fans work, hdd is spinning, the fan on the graphics card is spinning. Everything on the board seems to work I have followed the troubleshooting guide that is in the user manual.
-----------------------------------------------
Gigabyte Motherboard
-----------------------------------------------
Motherboard Model Name : GA-P35-DS3R(rev. 2.0)
--------------------------
M/B Rev : 2.0
BIOS Ver : f2
Serial No. : 4719331017121
Purchase Dealer :
-------------------------------------------------------------------------------
VGA Brand : Expert Vision Model : HD 2400PRO Sonic
CPU Brand : Intel Model : P4 HT Speed : 3.0 Ghz
Operation System : none at the moment SP :
Memory Brand : Patriot Memory Type :
Memory Size : 4gb Speed : 800Ghz
Power Supply : 400 W

2 replies

by Former member

That has come with the board. In the manual see if you can see the location of the "Jumper 1". This is a small plastic cover that sits on two pins, this plastic cover might be in the wrong position, please check. If ok then try and reseat you graphic card (take out and replace).
If ok but still will not boot then take your memory down to 2gb. If it still will not boot then take out your processor and replace, when you do this wipe off all the paste and re-apply the new thermal paste in a small amount (very small amount) and spread this very carefully around the processor and then re-seat the heatsink to the processor and restart your computer.
Can you access your bios now?. If you can then this is a good sign. If not then you will need to re-program the bios chip on the board, but hopefully this will not be the case. Hope this helps you.

Please post back if you have any more problems or questions.

This discussion is closed to new replies.