Discussion Locked
0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Even with a floppy it says "I/O error"?
4 replies
by i_izhaut
Point value changed by question poster.
by nccorthu
Take off all drives. Then be sure Floppy is connected. Besure its on last connector of the cable. Be sure the Cmos is set to boot from Floppy First then HD or CD and HD.
Depending on Cmos you may have to set it to boot from floppy if a newer machine and that A Floopy is enabled.
Be sure you have a bootable floopy in the drive.
Then Is it trying to boot or just dead. I.e. Is it going through POST OK?
I'm assuming that the floppy works ok on another machine.
by i_izhaut
Thank You this Worked! Now it is off My bench!
by i_izhaut
This question was closed by the author
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending
Discussion
How to make light speed agent go away
0 helpful
4 replies
Question
Floppy drive wont work on my 486
0 helpful
1 reply
0 helpful
1 reply
Discussion Locked
Ryzen 7 7700
0 helpful
2 replies
Question Locked
Issue fully resetting my PC
0 helpful
4 replies