Question Locked

my pc wont work grrr

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi hope someone can help me here,right 1 on my lovely kids decided that because my pc had crashed he would turn it off with the power switch on the back of my pc,now because he did this my pc wont start in normal mode it will only start in safe mode,so i decided to try a system restore and that didnt work,so i decided to reinstall windows xp pro.right still with me,now it got about 20 mins into reinstaling and my pc crashed when i finaly got it to restart in safe mode againi got the message "set up wont work in safe mode set up restarting pc",when it restarted it went past the splash screen and on to a windows screen saying that "set up is restarting.....",
then it just sits there doing nothing at all i let it stay like that for 1 hour then switched my pc off,can anyone help please thx..

6 replies

by toma

Edited

Message was edited by: beth.blakely@...

by older mycroft

The non-judicious use of this "implement of instant death" on any pc is not wise to say the least.

Sudden and violent removal of all power from a running pc could cause irreparable damage to the hard disk(s) as the floating heads plough into the spinning platters.

Can you expand on your pc's specification?
Machine type?
Hard drive?
CPU?
Installed cards?

by mdphoenix

The most ridiculous thing I've heard.

Mycroft, I've read some of your stuff and it's good. But comon. A hard drive autoparks the INSTANT power is removed from it. There's not time for the heads to crash into the platter. Don't scare the poor guy.

by older mycroft

The poster didn't say the age of the box and I will admit now to having done EXACTLY what I posted.

I achieved a destroyed platter in my own system some years back, when I removed the wrong fuse from the main power box.

I think the relevant phrase here is "when power is removed from it" NOT "when power is denied".

No fool like an old fool, eh?

by mdphoenix

First did you format the drive when performing the new installation? I would. Back up any data you have - How would you do this? If you have another computer, you can put the hard drive from the failed computer into the other computer and copy the data.

Back to the problem at hand - if set up keeps crashing, you obviously have a hardware issue. I'd go with simple things like RAM, and heat-related issues first. If you have more than one stick of RAM, pull all but one and try setup again. If it works, you have a bad stick or two. If it fails, try another stick until the failure goes away. If it doesn't go away, move on to something else. Open up the box and see if it's covered in dust - vacuum it out. Heat realated issues can be inconsistent. As the PC heats up, it'll get worse. So, conceivably, you could get all the way through set up, then the PC will fail after the first or second boot.

If none of these take care of the issue, as mentioned above, you can try the power supply. If you have another computer, you can try the PS from that unit in this one. Otherwise, find a local PC shop. Should only cost between 25 and 50 bucks depending on how old the box is.

If none of this works, you'd need to start looking at more serious issues. The hard drive, CPU, etc.

Good luck. Let us know how it goes.

Addition: It's also POSSIBLE that there's a virus hanging out in the boot sector. It could cause issues with the OS, with a new OS setup, etc. A format won't always get everything.

This discussion is closed to new replies.