Question Locked

my sys can't boot after it was interrupted while copying a ROMpaq

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
my compaq presario 1516,was copying from a floppy containing a flash rom when it was interrupted.it then displayed an error message that the system should be restarted using the critical diskette.since then the system can't boot.can anyone help me out?

4 replies

by animatech

You should probably refer to your motherboard user manual on this or post your motherboard make\model

by oh smeg

http://tinyurl.com/37qjt8

It may also be possible to rescue the existing BIOS Chip depending on the way that the M'Board maker has setup the procedure and for that you'll need to read the M'Board Manual

http://tinyurl.com/2uqf7m

Actually the BIOS Chip should be soldered to the M'Board so you'll have top go with the last option. As you didn't list the correct Model Number I've left the Web Page open to the site to get the information from once you chose the correct model of HP. It should have either a US or EA suffix.

Col

This discussion is closed to new replies.