3 replies
by alex.rohof Accepted solution
by oregonlighthouse Accepted solution
If you're using all AGP cards, perhaps try an old PCI or even (if the board supports it) a 16-bit card.
Also, if you get a blank screen, how do you know you're getting Post and such?
Another possibility is to see if your motherboard has a jumper or switch to turn off onboard video, rather than just a BIOS switch. Not all boards do, unfortunately, but IMO all boards should have the physical switch... makes situations like this a lot easier to fix!
If all fails, my recommendation would be to swap out motherboards. IF THE PROBLEM PERSISTS, then you most likely have other hardware issues causing the problem (a bent pin somewhere in a cable from the move, a short somewhere, a card that got ESD-fried, etc. It could even potentially be (trust me, I know) that ALL THREE of the video cards you tried are fried.
If this has been helpful, let me know (and if not, I'll quietly slink back to my cubical ).
by alex.rohof Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending