14 replies
by gary56789
XP is configured to automatically accept USB connections. The following URL has troubleshooting hints http://support.microsoft.com/default.aspx?scid=kb;en-us;Q310575.
"Remove and reinstall all USB controllers" should help.
If you still have problems, click the Add Comment button and let us know exactly what you are trying to do.
by thechas
Windows XP should work with nearly any USB port or USB device that exists. You may need device drivers for both the USB port and the USB device.
There are some older flash memory readers, printers and scanners that do not have drivers so that Windows XP can operate the device.
Now, what is your specific issue in getting XP to see your USB port?
If the ports are on your motherboard, or built into your case, they might not be enabled in BIOS setup.
If the ports are on a plug-in card, you may need to install drivers for the card.
If you are plugging a device into an un-powered USB hub, the hub may not be able to supply enough power for the device.
For many USB devices, you need to install drivers before you plug in the device.
If the above general tips do not help, please post more specific details of the problem you are having.
Chas
by hal 9000
I would go along with The Chas here in every case where I've run into an XP box not reconsigning a USB device the USB ports have been turned off in the BIOS.
It seems that some system builders did this at the early stage of XP as it didn't support USB2 so they just disabled the USB Ports in BIOS to overcome any possible problems.
Col
by hal 9000
I should have added this if you do not know how to turn on the USB ports in BIOS post back here by clicking on Add Comment and one of us will walk you through the process.
Lets know if you need any help.
by hal 9000
Well as Dell don't list the 7400 just by itself this gets a bit hard but generally you need to press the Del, F1 or F2 key to enter BIOS.
But as you have said you have removed the USB ports and can not reinstall them from Windows it sounds as if they are active in BIOS at least. Try performing a System File Check by clicking on the start button and in the Run option type SFC you'll need your recovery CD and it will pick up any files missing or that have been altered since the original install.
The bad thing here is that it will also remove any patches that you have applied since the computer was built and you'll need to reinstall every Hot Patch and everything else that has been released by MS since your particular system was built.
Col
by jdclyde
This may seem overyly simple, but is this a device that plugs directly into the USB port or does it have a cable?
The cable could be bad, try another or try this cable on another system.
Are you using a USB hub of any kind? Many devices play better and even recommend to plug them directly in for initial config and THEN run through the hub.
Lastly, if this is the ports in the front of the case, take the cover off and make sure that they are plugged into the mother board. Depending on who put the system together or other work that has been done since, it could have become unplugged or never plugged in in the first place.
I see this for CD/DVD players that don't have sound all the time.
Good luck.
by bominney
by bominney
by 3xp3rt
The windows XP recognize the USB ports, but the USB 2.0 will be recognize by XP just if you have installed min. SP1. Usually the motherboard driver CD have no USB drivers for XP but have a readme.txt file where are this information.
It?s possible that you have connected your printer to USB 2.0 port and this is not configured by XP.
by bominney
by wfs1946
by tomj001
Here are some pages from HP's website that may help. As mentioned before, check your USB cable to see if it's working and the printer's software is installed properly and is XP certified. Check in system devices for problems with imaging devices or multifunction adapters if this is a multi-function machine. You know, one that scans, copies, prints, faxes, etc.. For instance if it has a scanning function and it's not listed in system devices as your imaging device, it would indicated that the software/drivers are not installed. By the way,this is a discontinued product.
http://h10025.www1.hp.com/ewfrf/wc/product?dlc=en&lc=en&os=228&product=79499&lang=en&cc=us&
by weld387
Have you tried to "System restore" ? I would do that first. Roll back a few days before the changes you made. If that won't work it may be more work for you.
1. Go into bios menu set safe defaults.
2. If that won't work you may need the phone and cutomer support. YUK!!! Microsoft will generally give you a first time freebee. Sometimes you get a tech that you can understand what he/she is saying..They might even be able to fix the problem.
3. Final option may be to reload XP. It would be the Black disk that came with you computer. This will replace the drivers for your USB ports. Before you do this check with Dell. Good luck
by kare kubik
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending