Question Locked

NAT/firewall and Server 2003 RRAS

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have setup machine with 2 nics and setup RRAS.
NIC1:
172.30.x.1
255.255.240.0
no def gateway

NIC2:
DHCP

There are no filter setup on either interface in RRAS. NIC1 has been set to private interface and NIC2 has been set to Public interface and Nat enabled.

I am able to pi9ng from the internal to the external but not the other way around. Am I missing something obvious?

2 replies

by maniacman

It's usually a good idea to prevent the public interface from responding to pings because you can be victimized by the classic ping of death denial of service attack. Anyhow, if you're doing this for testing purposes, ensure that your static routes are in order between both interfaces so that traffic knows how to pass from one interface to the other. Instead of ping, use the tracert and pathping command to see how your packets travel to ensure that your static routes are setup correctly.

This discussion is closed to new replies.