Discussion Locked

Need assistance in setting up remote secure networks

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am a project manager for my company, I would like someone to review and possibly suggest some hardware for the project that I would like to implement.

Basically I host customer's proprietary systems in my lab where I perform proprietary testing on their systems. I want to be able to give my customers the ability to remotely log into thier equipment via VPN or another means so that they are able to diagnose and correct issues that I find on their systems.

What I would like to do is the following:

Setup an independent internet connection (cable, DSL, T1, etc) with a static public IP address or a range of IP addresses.

Each customer needs to have thier own secure network that I can put their equipment on. I would most likely use VLAN on a 48 port cisco switch.

A customer needs to be able to access thier network through a secure means because the data they send is confidential. So I would assume this would involve a VPN for each customer via a hardware appliance such as a pix firewall or ASA.

All of my customers are competitors of each other, so each VPN needs to be secured from each other so that one customer cannot access another customers network.

This is what I was thinking: I setup an enterprise business account with cable modem service. There is a static public IP associated with this that will accept incoming connections from my customers.

This gateway is associated with my firewall appliance which will prompt for a login/pass in order to setup a VPN connection. I guess one question that I have is: can I assign users to a different network based on thier username/password. What hardware do I need to do this? Do I need an additional router in this instance with a cable modem? If I use a T1, would I need a router or will the firewall do this for me?

This is just a preliminary brainstorm. I would like to get feedback from all you gurus out there and possibly bounce some ideas and questions off of you if you are willing.

thank you for your help.

9 replies

by sharpnspikey

You are absolutely correct, and I apologize for not thanking that individual for their contribution to my post.

It is not my intention to take advantage of the wealth of knowledge that TR offers without contributing myself or offering my gratitude when I receive help. So with that being said, I appreciate your input and the input of others.

by mholman

you might take a look at SSL-Explorer an SSL VPN solution that comes in two flavours, a community edition released under the GNU GPL license and an Enterprise Edition with licenses priced on a per concurrent user basis.

by sharpnspikey

thank you for your replies. I am not as familiar with SSL VPNs, but from the description, I like the fact that clients do not need special software. I do not see where it talks about routing users to different networks based on login, but I am probably overlooking something. Would I need a router or layer 3 switch to accomplish this?

by michael kassner

Each product has different methods of doing what you require. It could be different websites that point to different networks/subnets or a single website that is username/password aware that points that person to the respective network.

I might suggest talking to the actual vendors as they will be able to answer your questions way better than I could.

It is somewhat dated but here is a link to an article comparing several flavors.

http://www.infoworld.com/article/05/02/04/06FEsslvpn_1.html

I trust the SANS organization and they have a good article about SSL VPNs as well.

http://www.sans.org/reading_room/whitepapers/vpns/1459.php

by sharpnspikey

This would be an expensive way to go, but money is not necessarily an object. What if I get a router that can handle 8 or so interfaces and just have point to points from thier end to me? Will they require any hardware on thier end?

by michael kassner

If you have 8 circuits, the customer will have to have a CPE device for that circuit at their location, possibly a router to direct traffic to that circuit or others depending on the frame addressing.

You would have to also have 8 CPE devices, one for each circuit or a router that has a CSU/DSU WIC card for each circuit. If the router is going to have 8 or more internal ports/interfaces, you could direct traffic from a specific external interface to the appropriate internal interface.

This discussion is closed to new replies.