Question Locked

need help routing the DHCP requests to another VLAN.

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

scenerio--have added an additional VLAN to the 3750 and need help routing the DHCP requests to another VLAN.
Here is a brief overview -
VLAN 8
DHCP Server on VLAN 8 everything works fine.
10.10.8.0

VLAN 200
DHCP Server on VLAN 200 everything works fine.
172.16.0.0

VLAN 2
DHCP Server on VLAN 8 - cant get an address.
10.10.200.0

on interface VLAN 2,have configured a ip helper-address of 10.10.8.x which is the address of the DHCP server where the DHCP server has a scope configured for 172.16.0.0. also have IP Directed-Broadcasts enabled on the VLAN 2 interface.Does there need to be an access list set up for VLAN 2 and VLAN 8 to communicate?

2 replies

by robo_dev

Is an end-station connected to VLAN2 fully functional on your network when assigned a static IP? It is only the DHCP part that is not functioning?

Couple of possibilities:

The ports on the 3750's are not set to "spanning-tree portfast". Some services will time out trying to get a DHCP IP during the normal spanning-tree checks.

"DHCP Snooping" protects you from rogue DHCP servers. If the up-link is not set to trusted, DHCP is not going to work.

There are other security features on the 3750 too.....

This discussion is closed to new replies.