Question Locked

Need Help setting DNS up from Scratch

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HELP! I just can't get anything to work. I have read just about everything on the net. Now I can't add any clients to the domain.

Here are my linksys router settings:

ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : NTIGCPOS4
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros L2 Fast Ethernet 10/100 Base
-T Controller
Physical Address. . . . . . . . . : 00-1E-8C-6A-62-3D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.105
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 216.165.129.157 216.170.153.146

The router is running my DHCP

Server 2003 settings:

Static IP: 192.168.1.2
Domain Name: NTI_Domain
Server Name: NTIDC1

This server is also my domain controller
When I configured my AD I ran the DNS setup wizard.

Is there anyway I can delete all forward zones and reverse lookup zones and start from scratch?

I initally setup the DNS server and the domain was slow and client's couldn't get out to the internet.

3 replies

by erickson147

I will follow these articles for a second time when I recreate AD and DNS. I can get computers to join the domain after the AD and DNS creation, but it takes about 5 min for a computer to login. Then when I set the PC's DNS to the server IP I get no internet access on the clients.

Cisco Router to Linksys router (configured with ISP's DNS, ISP's Gateway, ISP's IP, and running DHCP 192.168.1.100-254). So my 2003 server running as a DNS server and is also the DC(which is server static IP of 192.168.1.2) is supposed to point to the ISP's DNS configured on the linksys then out the Cisco router. Correct?

This discussion is closed to new replies.