Question Locked

need to flash bios from CD on a gateway M-1412 !! help !! please !!help!!

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I removed the hard drive, cmos battery and ram of memory, even bought a new hard drive and tryied to install XP, but it won let me install or get into my operating system,
bios is all a mess.
I researched and gateway has an update with a utility to flash bios but it can only be used with in windows.
I can not istall or get into windows.
Does anybody know of anything I can use to flash the bios from CD?
my laptop is a Gateway M-1412 Phoenix TM for bios.

keep in mind that I can not install, or get into my operating system, I don't have a flopy drive, but it seems to be able to boot from CD ok.
it just won't let C: work

any help will be apresiated!

3 replies

by oh smeg

And resetting it here? All you need to do is set the Date & Time then select the Load Defaults and save the changes when you exit BIOS to return this to the Factory Defaults which worked previously.

By the sounds of things you have a Power On Password involved here which [b]Will Not[/b] be defeated by a BIOS Flash as it's not in the BIOS Chip.

If that is the case here you only really have 3 options

[b]1[/b] Ask the Owner what the Password is and use it.

[b]2[/b] Take the NB to an Authorized Gateway Service Agent and get them to clear the BIOS.

[b]3[/b] Buy a new M'Board and fit it to the case.

Col

by w2ktechman

ok, take a small flat head screwdriver to the BIOS pin 9. Tap lightly, to break the connection. Make sure it is totally broken off.
Get a grounding strap and put it around your wrist. Then connect it to the frame of the system.
Find a power cable, cut the end off that would plug into a computer. Make sure to strip 1/4" off of each of the wires,
twist the red and white wires together and solder them to pin 9
tie the rest around the frame of the computer.

Do not plug it in yet
get a pail of mud (metal pail should work the best) make sure it is nice and wet. Stand in the pail of mud bare-footed.
Make sure the wrist strap is on good.
Plug in the power cable for 32.8 seconds.
Doing it for less time than this will require a re-do. However if you do it for more than 41.1 seconds, you will need to replace the BIOS

This discussion is closed to new replies.