Discussion Locked

Need to "fool" PC into printing 11x17

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My home PC runs Windows XP & Office XP. My only printer is an HP DeskJet 6122, which does not support printing on 11x17 (tabloid?) paper.

However, I CAN print on 11x17 at work on a network printer/copier (Xerox Document Centre).

So, I need to"fool" my home PC into letting me design 11x17 documents. I will then email the docs to my work email and print them at work using the Xerox's 11x17 paper.

I'm most interested in being able to print large Visio drawings, but I'll also want to print Excel and Word on 11x17.

Thanks in advance!

13 replies

by justanadmin

In any of the MS Office programs (Excel, Word, even Visio) just go to the file menu, choose page setup.

You'll find all of the options on setting up a page size there. You can choose from common sizes or define a custom page size.

Hope that helps!

by shasca

I would create an 11x17 template at work for each program you would be working in, Email it to your home and save it to that machine. Use the template whenever you need to revise/create a new document. This way all documents will appear same no matter where created.

by ideafixer

Install a print driver that handles that page size. If you can get the Xerox print driver and install it on your workstation that would be great. Word formats pulls formatting information from the print driver.

I would recomment going to Xerox's web site and downloading a print driver.

by justanadmin

In Visio, once you have gone to File -> Page Setup, you should have a tab for Page Size. On this tab you should have radio buttons for Default Size, Pre-Defined Size, and Custom Size. Custom size, once selected, allows you to manually input the sizeof the paper.

Word should be almost the same.

Good luck!

by cmb from omaha

Thanks! Actually, I had tried that before, but I didn't think it was working b/c it wasn't showing up properly in Print Preview. But of course it didn't look right in Print Preview, since the current printer can't print an 11" X 17"! Doh!

by mptechonline

Go ahead and email the current Document in the 8-1/2 x 11 as is without trying to fool it and then do this.....

I have an HP1100 (only 8-1/2 x 11) and do the same thing. I print 11x17 on my Xerox Document Centre 425 by changing the print size viaFILE\PAGE SETUP and then on the PAGE Tab, check off the FIT TO 1 wide by 1 page tall and then below that select 11x17 for the Page size.

That should do ya....

by don christner

Go with answer 3, I do it all of the time. Just install the printer that you have at work (just the software drivers not the actual printer) and name it something so everyone knows that it does not exist (like Phantom 11X17). Then you can design for11X17 within any software package.

Don

This discussion is closed to new replies.