11 replies
by wovercash Accepted solution
by thumbsup2 Accepted solution
Today, my system did the same thing. It could have happened yesterday, but I didn't notice it then. Up until I noticed, I had been sharing files the printer without problem. Today, the laptop couldn't see the printer connected to the desktop nor could it access the shares.
I ran the network setup wizard again and found that file and printer sharing had been turned off. Even though the shares still looked to be there and everything appeared to be turned on including file and printer sharing in the firewall... when I look at each individual computer through the wizard, the protocol was turned off on the desktop. The laptop had not changed, although it had not been turned on for a few days either.
I don't know if MS slipped us another unauthorized update that we didn't know about or what exactly did happen, but that's what I found and what worked to correct it.
by wovercash Accepted solution
by thumbsup2 Accepted solution
by thumbsup2 Accepted solution
The laptop just did it, twice, today.
When it first booted, it had no LAN. It had internet, but not LAN. I ran the wizard on it and reconnected the LAN. It was communicating while I was running WinMerge to synchronize some data folders. While I had my back turned, working on the desktop, it dropped off the network. It still had internet access. I went through wizard to set it back up and it immediately dropped back off. I ran the wizard a 3rd time and it has been connected and working ever since.
So, what do we have in common?
I do not use Zone Alarm. I use a Qwest DSL wireless router/modem for LAN (desktop via cat-5, laptop via wireless). The Qwest modem is the DHCP server, firewall and gateway. Both computers are WinXP SP2 fully patched (plus some). Both computers have Windows Firewall turned on. Both computers use Norton 2007 Antivirus. Both computers run Office 2003 Pro fully patched. The laptop doesn't have much else installed on it. I use it to take with me in the field, then come back and synchronize folders and do the majority of work on the desktop. On the other hand, the desktop has so much crap on it..... well, you know.
I just had a thought. Is it possible Norton updated something that caused it?
by wovercash Accepted solution
by wovercash Accepted solution
Will try it. Thanks. Will go offline to do it. 2nd nic is my internet connection. Will get back later. Strange things about those bumps huh!
EDIT - Tried that and no luck then either. With just local network running, still exibits same problem. Going out to buy new nic tomorrow, and try that. Thanks for the suggestions anyway.
by net1tech Accepted solution
) Rip netbios, reboot and reinstall
) Zone Alarm - had a lot of issues keeping my home network running with Zone Alarm. Disable Zone Alarm. Use a simple firewall like Sensive Guard without all the bells and whistles temporarily to test.
by wovercash Accepted solution
by nentech Accepted solution
Try installing the NetBEUI Protocol
This was use by Microsoft in the old days
On the Windows XP cd in this folder
VALUEADD / MSFT / NET / NETBEUI /
Open the file NETBEUI.TXT
This will tell you how to install it
You can also try the IPX/SPX/NetBIOS Compatible Protocol
These Protocols will be ignored by TCP/IP network devices
They can be handy if you want to stop someone from using the internet
But still want to share files with them
Just disable the TCP/IP Protocol on their computer
Bingo they can access other network PCs but not the internet
Col
by wovercash Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending