Question Locked
0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a verizon DSL service. I bought my own DSL modem which is a Actiontec GT704. I also have a netgear Rangemax wireless router. I have the Netgear pluged into the Actiontec. I have it designed as a core(Actiontec DSL) and internal (Netgear). So you have the 192.68.1.0 network and you have a 10.0.0.1 network. The problem I am running into is, I work from home sometimes and I have to use my VPN Client for connection to my company's network. Every time I try to connect it tells me that the device I'm is not operting correctly. Can anyone walk me through the setup for both devices? On the Netgear it tells me the LAN port link is down, and I've tried different IP's static routes etc to get the link up and no go. Any idea's?
4 replies
by cjones54 Accepted solution
Clarifications
by thayes Accepted solution
see:
scroll down about 1/3 of the way to find a section titled: "Local Security Authority"
Hope this helps...
by cjones54 Accepted solution
Thank you for the comment. I will try that step.
by cjones54 Accepted solution
Hi and i thank you again for the helpful tip. It did not work. When I configured it for a DMZ I lost all connection. When I set the Actiontec router firewall config with a medium level IPSEC still does not work and I lose my access to my company's mail service. If you have any more tips I'd appreciate it.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies