Networks

Ask something
Discussion Locked

netware won't boot

0 helpful
5 replies

by olaoluwakintan

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just tranfered a netware server from our lacation to another and just when we plugged in back after a week the system just wont boot i jave tried.the Red led and green just stays on, the keyboard show no activity too.please help

5 replies

by sgt_shultz

steady. something just juggle loose in shipping. ground yourself, then reseat all the cards. especially any that wiggle (smile). if the processors and/or ram are in a slot, reseat those too. if it still won't boot, reseat them again. sounds like RAMor the processor as you get no BIOS beeps...and tell us exactly what hardware. some systems are known for this. i have a couple dells workstations which are pain in the arse because RAM cards come loose and system goes dead like you describe. very scary. i have also seen a couple homebrewed systems where slot one processors were not properly strain relieved and vibrated loose occasionally...this is fixable. hang in.

This discussion is closed to new replies.