Question Locked

network cable unplugged

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have just bought a Netgear WPN824 router. When connecting the hardware with the setup wizard the modem has to be turned off, which results in a message LAN network cable unplugged. When all cables are connected with modem-router-pc and it's time to power up the modem again, the message LAN Network cable unplugged remains and there is no response from the modem. Therefore, the router is also not working and there is no internet connection.

2 replies

by dedlbug

Ok, you have a modem, a router and a computer. Let's double check your connections first. Your internet signal come into the modem, then your modem connects to the WAN port on your router, then your PC connects to a LAN port on your router. If the router is turned on and your PC, still says "Network Cable Unplugged", try a new cable. It you have more than one network port, make sure they are both enabled, and the correct one is displaying the error.

It could be a bad network card as well. If you can't get the NIC card to recognize when a cable is plugged into the port, then the router or modem have no part in the scenario yet. Provide us with your ISP, modem model, computer brand/OS, and we can help further. =]

This discussion is closed to new replies.