Printer Default changing when log in to Terminal Server
1.Open the Terminal Service Configuration snap-in.
2 Right click the RDP-Tcp connection, and click Properties.
3 In the Client Settings tab, ensure that you check the "Use
connection settings from user settings" and "Default to main client printer"
items.
4 Log off the client and then reconnect to the terminal server
to test again
2.. Check the following group policies on all levels of
containers, such as domain, the terminal server OU and the local
policy on the terminal server. Please ensure that the following group
policies are not enabled.
[Computer Configuration\Administrative Templates\Windows Components
\Terminal Services\Client/Server data redirection\Do not set default
client printer to be the default printer in a session] "
Check LOCKED DOWN policy of the Terminal
Servers. It might be enabled. Set the policy to NOT DEFINED.
Ran "gpupdate /force" on both terminal servers and the Domain
Controller. Check the RDP-Tcp connection. "Default to main client
printer" is this now checked?.
Test the Default printer from a remote client. Their default
printer might be defaulting to their own LOCAL default printer for
starters. Changing the default printer to something else, it should now
stick after logging out and logging back in.
3.Thanks to Inn Jinn In.
Please post back if you have any more problems or questions.