Windows Forum

Ask something
Discussion Locked

Network printing problems P2P

0 helpful
1 reply

by borg7of9

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an HP Inkjet 1200 installed on a workstation, and I shared it with 2 other workstations. Test pages print fine and when I installed I printed douments ( word, pdf, etc... ) to test. ALl was ok. However, when one user tries to print larger jobs over the network, they will not print. ( can print from local station though )

The documents are not huge, but when they spool, they are quite large. Is there any settings say in registry I can change, to allow these larger documents to print?

1 reply

by dugadugdug

Suggestion (to speed up printing and hopefully to allow printing of the larger documents):
Set within the advanced properties of the printer to start printing immediately and not start printing after last page is spooled. Also, for the port settings, set the protocol to Raw.

HTH

This discussion is closed to new replies.