4 replies
by sgt_shultz
by thechas
You can set up a limited function USB network using a USB data transfer cable.
DO NOT use a standard USB cable or hub!!!
This is similar to the old serial or parallel link cables that were used to sync files between a desktop and a laptop.
It will be slower than a regular network, but will allow you to share files between the 2 PCs.
I do not know if you can share other resources such as printers and internet connections via any data transfer cable.
Chas
by rasman
Here is the solution to all of your XP connection issues. Too much info to hammer out so here is the article number.
PSS ID Number: 814982
Enjoy!
Ras.
by fenaikh
Hi
There are limitation of using USB for network since some old Operating system don not support USB technology such as DOS NT.
to get more info pls visit the folowing page and there are more info about USb prodocts in this site too.
USB Cable Networking : Introduction
http://www.wown.com/j_helmig/usbmain.htm
for short:
http://tinyurl.com/t6hp
Good luck
Mohamed
Note:
plase remove any spaces or any char such as %20 when you copy the URL.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending