Question Locked

Networking

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My pc was not connected with network but i wanted ot connect in network.My problem is i have a broadband which connected with lan port i have no other network port. How i can make my pc in network to access other pc

3 replies

by mr.wiz

Add another network interface card to your computer and connect it to your network.

by hal 9000

That will allow you to connect the Broadband modem to the computer or that computer to a Hub/Switch so it's part of the Network.

If you are thinking of running the Broadband Connection directly to this computer and then share the Broadband connection across a Network you'll need to add 2 NIC Cards. The only thing that you need to look out for is that you can not mix 100 T Base & Gigabit LAN Cards as they will not work ion the same computer so if you are using 2 X 100 T Base NIC Cards you can just buy these for very little and fit them to the computer and then run the Network Setup Wizard and tell the computer that it connects directly to the Internet and that other computers connect to the Internet through this computer or that this computer connects to the Internet through another Computer or Residential Gateway in the Network Setup Wizard.

As you are unlikely to have any Server product all you need do is chose the Workgroup option and make sure than all the computers have the same Workgroup name and if you wish to share files or printers enable the Share Files & Printers when you run the Network Setup Wizard.

Col

This discussion is closed to new replies.