Question Locked

Networking devices

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Does a router,Swith and hub have an NIC installed in it,If yes how can we know whether it is installed or not

2 replies

by hal 9000

Routers are a computer with one application provided that they work everything that should be installed is.

Managed Switched are the same if the light comes on when you plug in a CAT 5 Cable there is the ability to connect from that port or socket. Hubs on the other hand are just straight hard wired units that split one CAT 5 lead into whatever number of outlets that they have. Generally there is some passive circuitry inside them and if changing a cable from one socket to another works and it stops working when you replace the cable to the original socket then that socket has suffered some form of damage. If this happens replace the Hub as they are cheap and easy to change. Just remember to change the Power Adapter with the Hub to prevent destroying another Hub. If the entire Hub is not working it's possible that the Mains Adapter has failed and burnt out the Hub. While not common it's possible particularly with the Plug Packs that come with the cheap Hubs.

If you want to check this remove the Hub and use the Uplink Cable to connect to a computer if that works then most likely provided that you have cycled the Hubs power and it still doesn't work that Hub has died.

Col

This discussion is closed to new replies.