3 replies
by mkbranch Accepted solution
by cg it Accepted solution
on the WAN link configuration you have to specify which connection type. If your DSL is PPPOE, then when you setup your WAN properties on the netgear, you have to specify PPPOE and the proper authentication verizon gave you.
If the westell modem is a ADSL+2 [look on the bottom for the model, its a router as well. 2 routers = 2 networks. That means that the netgear WAN has to be configured with a Westell LAN properties and the default WAN gateway would be the Westell address. the Netgear LAN needs to be on a different subnet than the Westell LAN.
example: Westell router WAN = PPPOE per verizon
Westell router LAN 192.168.1.1 255.255.255.0
turn OFF Westell ADSL +2 router DHCP service
Netgear router WAN static address 192.168.1.2 255.255.255.0 default gateway 192.168.1.1
netfear router LAN 192.168.2.1 255.25.255.0 default gateway 192.168.2.1
DNS is ISP DNS servers for both routers.
by eicraenaj Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending